10 exam-style questions with answers and explanations, straight from our 1,030-question bank. Tap an answer to check yourself. When you're ready, take the scored version in the free practice test.
These 10 free AL-CDL questions are organized by exam domain, so you can see how each part of the Alabama CDL Permit Test blueprint is tested. Reveal the answer and explanation under each question.
Domain 1: General Knowledge
Question 1
A carrier assigns a driver to a truck with a 24,500-lb GVWR towing a trailer with a 12,500-lb GVWR. The manufacturer lists the combination at a 37,000-lb GCWR. The vehicle is not carrying placarded hazardous materials or 16 or more people. What class of CDL is required?
Show answer & explanation
Correct answer: C - Class A
Question 2
After the required first-50-mile cargo check at 8:05 a.m., a driver travels another 142 miles without a break. At 11:10 a.m., no further inspection has been made. Which assessment is correct?
Show answer & explanation
Correct answer: A - The inspection is overdue because the three-hour limit came first
Question 3
A 60-foot tractor-trailer is traveling at 55 mph on a dry, level highway. Traffic is steady, and the driver has a six-second following gap. Under the CDL following-distance rule, the driver should:
Show answer & explanation
Correct answer: D - Increase the gap to at least seven seconds
Question 4
At highway speed, the right front tire suddenly blows. The vehicle pulls sharply toward the shoulder, but the lane ahead is clear. The driver's first response should be to:
Show answer & explanation
Correct answer: B - Grip the wheel firmly and avoid braking at first
Question 5
An H-endorsed driver approaches a railroad crossing with a placarded load. The crossing is not marked EXEMPT. The gates are up, but stopped traffic beyond the tracks leaves only 35 feet of clear pavement for a 62-foot vehicle. What should the driver do?
Show answer & explanation
Correct answer: B - Stop 15-50 feet from the rail and wait for clearance
Question 6
At 5:00 p.m., a property-carrying driver has been on duty since 6:00 a.m. after 10 consecutive hours off. The driver has accumulated 7.5 hours of driving and has just completed a qualifying 30-minute on-duty, non-driving break. The 60/70-hour limit is not a factor, and no exception applies. How much longer may the driver legally drive?
Show answer & explanation
Correct answer: D - 3 hours
Question 7
A 14,600-lb machine will be secured with identical tiedowns rated at 2,000 lb WLL each. The machine's length and placement do not require a greater number. What is the minimum number needed to satisfy the aggregate WLL rule?
Show answer & explanation
Correct answer: A - Four
Question 8
During a pre-trip inspection, a driver measures 3/32 inch of tread in the major grooves of both steer tires and 3/32 inch on every drive tire. No cords, bulges, or other damage are visible. Which finding requires correction before the trip?
Show answer & explanation
Correct answer: C - The steer tires only
Domain 2: Air Brakes
Question 9
During a dual-air inspection, the low-air warning buzzer activates at 62 psi and the parking-brake controls pop out at 34 psi. How should the driver evaluate these results?
Show answer & explanation
Correct answer: B - Both tests pass
Question 10
With the wheels chocked, engine off, parking brakes released, and system stabilized, a tractor-semitrailer loses 3.5 psi in one minute while the service brake is fully applied. No other defect is observed. Under the combination-vehicle applied-leak standard, this result:
Show answer & explanation
Correct answer: A - Passes; 3.5 psi is within the applied limit